Magnetic Particle Inspection Equipment

As per the exact demands and needs of our customers, we present them a customer specific Magnetic Particle Inspection Equipment. This Magnetic Particle Inspection Equipment is efficient to work smoothly and effectively. Also, this Magnetic Particle Inspection Equipment is manufactured by us as per the international quality norms.

Specifications:

  • The Supermag Bench Units are our most economical standard wet bench units. We offer great particle mobility for finding surface and sub-surface cracks of using AC or DC magnetization. The two outputs are independently adjustable to set each magnetic field, circular or longitudinal. Magnetization shot time is adjustable allowing better development of indications
  • 100% Solid state Circuitry
  • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
ddddddddddd

CENTRIFUGE TUBE AND STAND

Specifications

  • Essential item for bath concentration
3

MPI Mobile Power Packs

Specifications

  • Supermag understand some parts cannot be move so the magnetizing station needs to be brought to the part. The SMM series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC Output.
  • Feature AC or Half Wave DC Output.
  • SMM -30 – 3000 Amps. AC/HWDC.
  • SMM -40 – 4,000 Amps. AC/HWDC.
  • SMM -60 – 6,000 Amps. AC/HWDC.
  • SMM -80 – 8,000 Amps. AC/HWDC.
  • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
yy

MPI Portable Power Packs

The goodwill we have gained in the market is due to offering high quality range of MPI Portable Power Pack. The entire range of power pack is designed under the supervision of skilled professionals. This power pack is well tested on number of quality provisions for assure the quality at customer’s end. Our customers can purchase this power pack from us at reasonable rates.
Features:

  • Simple installation
  • Best output
  • Durable finish standard

Specifications:

  • Length: 17.5″ (44.5 cm)
  • Width: 9″ (22.9 cm)
  • Height: 8″ (20.3 cm)
  • Maximum Output: 750 amps, AC or HWDC
  • Available Voltages: 115,230, 50 or 60 Hertz, single phase power
  • Line Current: 26 amps 115 VAC, 13 amps 230 VAC
  • Maximum Duty Cycle: 2 minutes on, 2 minutes Off
  • Unit Weight: 35 lbs (15.9 kg)

Portable Power Pack:

  • Portable Power Packs are convenient and economical inspection units that are used in a wide range of magnetic particle applications that require only moderate power
  • The Magnaflux Portable Power Packs are ideal for large or heavy parts, in-service mobile equipment, or job-site welds.
  • Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
  • Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
  • Infinitely variable current control
  • Demagnetize your parts in AC mode by slowly turning the current dial to zero
  • Built-in automatic-reset circuit breaker
  • May be used as the main power source for the Super MAG Kit modular bench inspection system
k7

Mpi Mobile Power Packs

Item Code: SMM-series Specifications

    • Supermag understand some parts cannot be move so the magnetizing station needs to be brought to the part. The SMM series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC Output.
    • Feature AC or Half Wave DC Output.
    • SMM -500 – 4,000 Amps. AC/HWDC.
    • SMM -530 – 6,000 Amps. AC/HWDC.
    • SMM -80 – 8,000 Amps. AC/HWDC.
    • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
k8

Magnetic particle Mobile Power Source

Highly driven by technical excellence, we are noted as the foremost manufacturer, and supplier of Mobile Power Packs. The offered mobile power pack has output of 3000 amps AC and HWDC magnetizing current, the. The offered mobile power pack is acclaimed in the market for its flawless performance & stringently tested on several quality parameters to ensure its quality.
Features:

  • Flawless performance
  • Simple installation
  • Less maintenance

Exterior:

  • Digital Meter Display
  • Two Bus Bars for Connection
  • Push button Switch for AC output
  • Push button Switch for HWDC output
  • Push button Switch for Mag – Momentary–magnetizes as long as button is pushed
  • Push button Switch for Demag – One touch auto cycle and switches to decaying AC automatically
  • Push button Switch for power on/off
  • Push button Switch for pulse – 1.5 sec on, 3 sec off for 30 sec
  • Infinitely variable current control
  • Two (2) fixed heavy-duty casters
  • Two (2) swivel casters with locks
  • Lift hooks for extra unit mobility
  • 115 Volt Convenience Outlet (10 amp)

Interior:

  • Thermal Overload for circuitry protection
  • PLC Circuitry for extra reliability
  • Secondary Current Control
  • Flow through cooling for heat dissipation
  • Solid State Switching (AC to HWDC)

Benefits:

  • Ability to easily move the unit to the part for inspection
  • Convenient hook on back side of unit to wrap cables after use
  • Saves space as well as keeps cables lasting longer without being dragged along the floor when moved

Mobile Power Packs M- Series:

  • The Magnaflux M-Series Mobile Power Pack facilitates testing of large and abnormally heavy parts
  • Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part
  • The M Series offers a solution by providing an adaptable mobile unit
  • These units feature AC or Half Wave DC output
  • Output rating is based on Load Specified.
  • Note: M-2030 for long cable output is designed for applications in which the power source cannot be close to the inspection piece
  • This unit designed to work with long cable lengths necessary for inspecting large parts (i.e. power generator parts)

Specifications:

  • Output: 3000 amps AC and HWDC magnetizing current
  • Output rated: 90’ total of 4/0 cable
  • Dimensions: 46” L x 23” W x 39” H
  • Weight: 780 lbs
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • 7% Duty Cycle (maximum output with 1/2 minute ON time)
k8

Ketos Rings

Sturdily fabricated Ketos Rings are providing by our company to the customers. These Ketos Rings are available in various sizes as per the desires of our customers. Also, the corrosion resistant quality and high reliability of these Ketos Rings satisfy the customer most.

Specifications:

  • Drilled holes simulate sub/surface discontinues
  • Forms surface indications at various magnetizing current levels, as per MIL-STD-1949 and ASTM E-1444, for evaluating sensitivity of magnetic particles
ketos-rings

UV BLACK LIGHT BULBS

With our years of expertise and knowledge in the industry, we are offering a wide array of Black Light Systems. The Black Light Systems provided by us used in various industries and known for their hassle free performance. Moreover, the Black Light Systems we offer are technically advanced and saves time.

Specifications: 

  • 100 watts hand-held model includes transformer, cord and plug. Typical black light out-put 4000uw/cm2, white light emission less than 1ft, candle, plastic air Flo Bezel protects operator and filter glass, Meets U.S. Military standards.
uvlight

Centrifuge Tube and Stand

Specifications

  • Essential item for bath concentration
3

Black Light Systems

The SMUV-100F is Lightweight, well balanced, and has a cool running temperature which provides superior operator comfort. The unit also incorporates multi-voltage selection at 220V and 240V. From the NDT Leader, a high intensity black light that sets new standards for performance, comfort, safety, ruggedness.

Specifications:

  • Fan cooled hand lamp
  • 230V Operation
  • Light Weight Hand Lamp
  • Meets NDT Specifications
  • Strong & rugged to withstand rigorous NDT use

Technical specifications:

Power Supply 230 Volts 50Hz 1PH
Current Draw 1 Amp
Typical UV Intensity at 325 mm 4000 Microwatts per cm2
Bulb 100 Watt
* Running Temperature at 20°C Less than 40°C
Weight (Hand Lamp only) 1.4 Kgs.
Weight (Hand Lamp and Control Unit) 4.2 Kgs.
Lamp to Control Unit Cable Length 5 Metres
Mains Supply Cable Length 2 Metres

The SUPERMAG range of UV (A) light and accessories include:

  • UV (A) Fluorescent Tubes
  • Hazardous Environmental Fittings
  • Analogue and Digital UV (A) Light Meters
  • Digital visible and UV (A) Light Meters
  • Contrast Control Spectacles
  • See our Accessories Leaflet for more details
uvlight

Black Light Kit

With our years of expertise and knowledge in the industry, we are offering a wide array of Black Light Systems. The Black Light Systems provided by us used in various industries and known for their hassle free performance. Moreover, the Black Light Systems we offer are technically advanced and saves time.

Specifications:

  • 100 watts hand-held model includes transformer, cord and plug. Typical black light out-put 4000uw/cm2, white light emission less than 1ft, candle, plastic air Flo Bezel protects operator and filter glass, Meets U.S. Military standards.
uvlight

Digital White Light Meter

Being known amongst renowned and trusted company, we offer Digital White Light Meter. The light sources are provided by this Digital White Light Meter and result is in digital form. Moreover, our product is used in fluorescent magnetic particle and many more applications.

Specifications:

  • Accurately measures visible light by foot candles and lux
  • White light meter comes with meter, a permanently a fixed white light sensor, batter & carrying case
  • Meets ASTM E1444 Range for Lux: 200, 2000, 20000 Lux. Wavelength Range: 400nm-730nm, Peak wavelength 560nm
digitalmeter

UV Flood Lights

Specifications

  • High intensity of 6500-7000 Microwatts/cm2 at 12″
uvfloodlight

Residual Field Indicators

Additional Information:
  • Item Code: RFI-2
residual-field-indicators

Digital Black Light Meter

To satisfy the varying and growing needs of the clients, we are offering a wide range of Digital Black Light Meter. The Digital Black Light Meter we offer is highly demanded for their easy operation and reliability. Besides these, the Digital Black Light Meter is quality tested.

Specifications:

  • Accurately measures black light (microwatts/cm2). Includes Meter, a permanently affixed black light sensor, battery and carrying case
  • Meets ASTM E 1444
digitalblacklight

UV- Lights

The SMUV-100Fis Lightweight, well balanced, and has a cool running temperature which provides superior operator comfort. The unit also incorporates multi-voltage selection at 220V and 240V. From the NDT Leader, a high intensity black light that sets new standards for performance, comfort, safety, ruggedness.

Specifications:

  • Fan cooled hand lamp
  • 230V Operation
  • Light Weight Hand Lamp
  • Meets NDT Specifications
  • Strong & rugged to withstand rigorous NDT use

Technical specifications:

Power Supply 230 Volts 50Hz 1PH
Current Draw 1 Amp
Typical UV Intensity at 325 mm 4000 Microwatts per cm2
Bulb 100 Watt
* Running Temperature at 20°C Less than 40°C
Weight (Hand Lamp only) 1.4 Kgs.
Weight (Hand Lamp and Control Unit) 4.2 Kgs.
Lamp to Control Unit Cable Length 5 Metres
Mains Supply Cable Length 2 Metres

The SUPERMAG range of UV (A) light and accessories include:

  • UV (A) Fluorescent Tubes
  • Hazardous Environmental Fittings
  • Analogue and Digital UV (A) Light Meters
  • Digital visible and UV (A) Light Meters
  • Contrast Control Spectacles
  • See our Accessories Leaflet for more details
uvlight

UV Absorbing Spectacles

Specifications

  • Reduce eye fatigue from exposure to UV light emission
uv-absorbing-spectacles

MPI Mobile Power Source

Item Code: SMM-series

Specifications

    • Supermag understand some parts cannot be move so the magnetizing station needs to be brought to the part. The SMM series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC Output.
    • Feature AC or Half Wave DC Output.
    • SMM -500 – 4,000 Amps. AC/HWDC.
    • SMM -530 – 6,000 Amps. AC/HWDC.
    • SMM -80 – 8,000 Amps. AC/HWDC.
  • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
yy

Prod Unit

Specifications

  • For convenient, economical inspection in a wide range of magnetic particle, applications that require only moderate power. Use for detection of surface and near surface flaws. Use with prods, central conduction or coil.
  • SMP – 1500 amps. AC/HWDC.
  • SMP – 2000 amps. AC/HWDC.
  • SMP – 3000 amps. AC/HWDC.
  • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
k7

MPI Mobile Power Source

Specifications

    • We understand some parts cannot be move so the magnetizing station needs to be brought to the part. The SMM series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC Output.
    • Feature AC or Half Wave DC Output.
    • SMM -500 – 4,000 Amps. AC/HWDC.
    • SMM -530 – 6,000 Amps. AC/HWDC.
    • SMM -80 – 8,000 Amps. AC/HWDC.
    • Input supply 415 V, 50 Hz, 2 lines of 3 Phases
k8

Demagnetizer Track & Trolly

For attaining the total customer satisfaction, we present a client specific and quality approved Demagnetizers. These Demagnetizers are highly reliable and smoothly perform its functions. On the other hand, our Demagnetizers are completely tested at different levels for its quality assurance.
Specifications:

    • The SMD-1212 Demagnetizer is a fast, effective, dependable piece of demagnetization equipment. This equipment is created especially for volume demagnetizing of small parts on a production line. The SMD-1212 has a larger opening allowing for larger parts to be demagnetized.
    • Opening size: 12″x12″(30cmx30cm)
    • Voltage: 415V 50HZ / 2 phases
    • Ampere turns: 700
demagnetizers1

UV Bulbs

uv-bulbs

UV Torches

batt

UV Filter Glass

uv-filter-glass

MPI Equipment Repairing

iiiiii